Home · Applications · · Basic+
Habitable attic insulation – System 10 Basic+
The “+” variant of the System 10 Basic package: the same layers, with Wolle P2100 (λ 0.035) between the rafters. The basic package for the habitable attic: Wolle between the rafters, Gold beneath the rafters, the sealed air layer and Multistrat before the plasterboard.
Technical content: Bogdan Ivănescu, graduate engineer, PhD candidate at the Technical University of Cluj-Napoca · updated on 16.10.2026
What the package includes
Basic+ is installed from the room side. Wolle is installed between the rafters; in phase 1, Gold is installed beneath the rafters; the metal profile framework forms a sealed air layer of at least 3 cm; in phase 2, Multistrat is installed, and the build-up is then closed with plasterboard. Basic+ uses Wolle P2100, with λ 0.035, while Basic uses Wolle P1500, with λ 0.038; the remaining layers are the same.
Wolle, over the full height
Wolle is installed between the rafters over their full height, without gaps. At 15 and 25 cm, the 5 cm layer (λ 0.038) is installed first, towards the exterior, and the 10 cm slabs towards the room. The 5 cm layer adheres very well to the porosity of the substrate and requires no anchoring whatsoever.
Reflectiva Gold beneath the rafters
Gold is installed beneath the rafters once the insulation is in place.
Minimum 3 cm
The CD 60/27 metal profile framework forms the sealed air layer between the two phases.
Reflectiva Multistrat
Multistrat is installed on the profiles, with the aluminium facing the air layer, before the plasterboard.
System 10 Medium+
The complete membrane package.
See the package →
Another packageSystem 10 Premium+
The highest-performing Isoflect package.
See the package →
Package values
For each thickness of Wolle between the rafters.
System 10 Basic+ (Wolle P2100, λ 0.035)
| Wolle | R m²·K/W | U W/m²·K | Equiv. λ W/(m·K) | Conventional insulation λ 0.038 |
|---|---|---|---|---|
| 10 cm 10 cm λ 0.035 | 5,307 | 0,188 | 0,02751 | 20.2 cm |
| 15 cm 10 cm λ 0.035 + 5 cm λ 0.038 | 6,623 | 0,151 | 0,02959 | 25.2 cm |
| 20 cm 2 × 10 cm λ 0.035 | 8,164 | 0,122 | 0,03013 | 31.0 cm |
| 25 cm 2 × 10 cm λ 0.035 + 5 cm λ 0.038 | 9,480 | 0,105 | 0,03122 | 36.0 cm |
The values apply to the entire build-up of the package, with all the layers below, not to a single product. Calculated values, from the Isoflect document “System 10 thermal insulation packages”. “Conventional insulation” is the thickness that a conventional insulation with λ 0.038 would need in order to reach the same thermal resistance R.
The variant with Wolle P1500 (λ 0.038): System 10 Basic →
Installation steps
Click on the central image to enlarge it.
Products for this application
Warranty
- ✓Wolle: 50-year warranty (interior)
- ✓Reflectiva Gold: 50-year warranty, service life of at least 50 years
- ✓Reflectiva Multistrat: 50-year warranty, service life of at least 50 years
Frequently asked questions
What is the difference between Basic and Basic+?
Basic uses Wolle λ 0.038, while Basic+ uses Wolle λ 0.035. The other layers are the same; each variant has its table of values on its own page.
What does Medium add?
In phase 1, Medium adds two layers of Multistrat beneath Gold. The R-values of each package are given in the table on its page.
Can Basic be built with Roof Pro or Roof Optim?
Yes. Roof Pro or Roof Optim, beneath the roof covering, is optional with Basic: the package can be built with either of them or without. The values in the table are calculated without the membrane beneath the roof covering.
What does the equivalent thickness of a conventional insulation mean?
It is the thickness that a conventional insulation with λ 0.038 would need in order to reach the same thermal resistance R as the package: R × 0.038.
See and touch the products before ordering
The Isoflect sample pack contains samples of the reflective membranes and of Wolle wool insulation, so that you can compare the materials at home or on site.